Installation of a vanity light-How to Install a Vanity Light Fixture – Let's Fix-It-Up

Have you had it with those ugly Hollywood light fixtures? The ones where the bulbs are lined up in a straight line staring you in the face? Even if you live in an apartment, you can switch light fixtures out fairly easily. Be sure to keep the old fixture and all the parts so you can re-install it before you move out. I hope you can benefit from this tutorial.

Installation of a vanity light

Use the torpedo level to ensure that the mounting bracket is level before and after you tighten the screws. Installation of a vanity light ones where the bulbs are lined up in a straight line staring llight in the face? Place the tips of the black wire from the original cable, the black wire from the new cable, and the black wire from one of the new light fixtures together. I found the same as another poster when I removed my Hollywood light- no junction box, just a hole in the wall. Once it is all smoothed out let it dry for at least 2 hours or as the package says. Attach and tighten the mounting strip onto Installation of a vanity light electrical kf with a screwdriver.

Gum disease lump. ',title : '',after_title : '

Repower and verify proper operation. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. Scribe exposed panel Inwtallation to wall surface or apply molding at edge. Sales tax on materials and supplies. The cost estimate does NOT include: Costs for removing, relocating, repairing, or modifying existing framing, surfacing, HVAC, electrical, and plumbing systems - or bringing those systems into compliance with current building codes. Option: Installation of a vanity light Cabinets Detach from adjacent surfaces. Assemble, install drawers and hardware. Item details. Item details. Costs to prepare the worksite for Lighting Fixture Installation, including costs to protect existing structure sfinishes, materials and components. Exterior Painting. Zip Code. Fabricate vznity cutouts in back panel.

Subscribe to "Homedit" on YouTube to keep up with all of our videos and shows.

  • Change cost factors, combine homewyse items and add items you create - in a resuable pricing app customized to your business.
  • Change cost factors, combine homewyse items and add items you create - in a resuable pricing app customized to your business.

Have you had it with those ugly Hollywood light fixtures? The ones where the bulbs are lined up in a straight line staring you in the face? Even if you live in an apartment, you can switch light fixtures out fairly easily. Be sure to keep the old fixture and all the parts so you can re-install it before you move out.

I hope you can benefit from this tutorial. Required Safety Instruction: Turn off the power to the light fixture you are working on. I highly recommend turning on the light you will be working on, then shut off the circuit at your circuit breaker and check to see that the light has gone out.

Always check for the presence of power before you work on it. Unpack your new or slightly used light fixture. Read through the directions as some steps may vary from this installation tutorial. Locate any other screws that might be holding the fixture in place.

This fixture simply popped off. Laugh at any hidden colors and wallpaper beneath the fixture. Ah, not so bad. You should be left with just the junction box and three wires protruding from the box. The bare or green wire is your ground wire. The white is your neutral wire and the black is your hot wire. If you were eagle eyed, you might have noticed a small nick in the insulation of the neutral wire. This could cause a short, so I wrapped some electrical tape around the nick.

Install the new mounting bracket that came with your fixture if you bought a used one, you may have to use the old mounting bracket from the Hollywood Strip. Attach the screws through the bracket and into the junction box. The mounting bracket that came with my fixture has a rotating bar that can swing degrees. Position this bar so the fixture will hang level.

Once the bracket is level and fits snugly with only a small portion of the headless screws poking through; remove the light fixture and tighten the screw in the middle of the mounting bracket to secure the rotating bar. Wrap the ground wire from the junction box around the green or bare screw on the mounting bracket.

Connect the ground wire from the light fixture to the ground wire from the junction box. Twist them together and secure them with a wire nut. Gently fold and tuck the wires back into the junction box. Try to position the white wires on the opposite side as the black wires. Place your light fixture onto the headless screws and secure the fixture by screwing on the small ball caps. Slip the glass shades onto the socket and then screw the collar back on to hold the glass light shades.

I decided to rehang my fixture facing up for less direct light and to avoid bumping into the mirror frame. What do you think? Do you like the new look? Do you think you will try it yourself? I hope so, it was easy!

Thanks for the tutorial! However, when I removed the bulbs and the collars, there is a small copper wire connecting the front plate of the fixture to the wall? Is this just to hold It in place? Thank you! I just took down two of these style light fixtures but there were not junction boxes behind them. The builder just punched a small hole in the drywall with a hammer and fed the wiring through.

Do I need to have a junction box installed if I can get the light fixture base plate properly secured to the drywall with anchors? I did that in a previous bathroom fixture swap-out since the one I put back had a base similar to the original fixture. It just had domes over the bulbs in stead of the exposed bulbs. Kevin, YES! What your builder did was a fire hazard and a code violation.

All electrical connections must be contained in a junction box. Simply trace a hole where you wish to install the box making sure no studs are in your way. Then cut out the hole.

Punch out a tab in the junction box, feed your wires through the tab. Then press the box into the wall and use a screwdriver to turn until the wings rotate up and are securely tensioned against the drywall. Thanks for the guide. My new house well new to me has a pretty outdated bathroom and these same lights. I have been looking at them for weeks trying to decide if I could change them out. I am deathly affraid of shocking myself but this does make the task seem much easier.

I guess I know what I am doing this weekend! So I found you by google. I have a 4 light fixture in bathroom. I took the glass shades off to wash. I can not figure it out. It seems to big. Patricia, have you tried to flip it around and screw it on the other way? These usually are a little loose, but should hold the shades on. Omg, this! And Brittany is right. I was putting the ring on the TOP of the globe light bulb cover but flip it put in inside the globe and screw it on.

It will hold the globe. I was about ready to glue the dang globes into place! Old school was that screws would hold the globes in place. I was once with my friend in their house and his mother asked me to do something similar. I thought it was so hard but after a few screws, I know there were just intimidate if you just look at them.

Thank you Brittany for even posting an even easier way to change light fixtures. I just bought a smaller home that needs lots of updating.

I have Hollywood lights in both bathrooms. Thanks again. I did it! Thanks so much for your inspiring article. I found the same as another poster when I removed my Hollywood light- no junction box, just a hole in the wall. It took me just a few minutes to put it in, and within another 10 minutes my new light fixture was up and looking great.

Thank you!! So glad you replaced your light and installed a junction box. That will make it so much safer. Ah fashion is fickle and never ends I am afraid.

I also actually see them selling those old Hollywood light strips again! Still the tutorial is good. Lighting is such a make or break in decor. Kaycee, well this tutorial was written in , when that light fixture was in style. Hopefully readers will overlook the light fixture and garnish the information on how to change a light fixture ;-. Thanks for the post. It gave me the courage to replace the light fixture in my hall bathroom myself. I am feeling successful!

You can purchase a remodel old work junction box from your home improvement store. It slides into a hole you cut to size, and then there are fins that grip the back of the sheetrock when you tighten them with a screw driver. This site uses Akismet to reduce spam. Learn how your comment data is processed. Privacy Policy. You might also like:. Comments Thanks for the tutorial!

Site message including reference link shown here. For existing systems with compatible AFCI breaker option only. Costs to prepare the worksite for Lighting Fixture Installation, including costs to protect existing structure s , finishes, materials and components. Remove existing circuit breaker. Cut new opening and secure new box. So, let us know - how can we improve this site? Metal drawer guides.

Installation of a vanity light

Installation of a vanity light

Installation of a vanity light

Installation of a vanity light

Installation of a vanity light. Unit Costs: How Pros Price

.

How to Mount a Light On Top of a Mirror Bathroom Vanity

Subscribe to "Homedit" on YouTube to keep up with all of our videos and shows. One way to customize your bathroom, no matter the style or size, is to install an oversized vanity mirror and mount a bathroom lighting fixture on top of the mirror face itself.

View in gallery. This strategy allows you to maximize your vanity mirror size and height which serves to expand the space and double up on your lighting — a win-win. This tutorial will walk you through how to accomplish this successfully, without damaging your custom-cut mirror. Remove the old light fixture if applicable , and cap off your loose wires in the electrical box.

Note: The painted-out space in this photo will soon be covered with a custom-cut above-vanity mirror. Either way is fine as long as the mounting screw holes are visible and fully accessible. This was a surprise, because the cutout was sized to fit all standard-sized lighting installation components.

As many DIYers are wont to do, we were forced to move onto Plan B: Reuse the original mounting strip, which did fit through the hole and onto the electrical box screws. But it was one we had to take. Hopefully, your own mirror-cutting experience will be perfect. Screw two mounting screws the longer ones you purchased into the holes on your mounting strip.

You might not need to screw them in all the way. Add nuts to keep them from unscrewing when it comes time to attach the flange. Now measure distance X away from the face of your mirror while holding the mounting strip next to your electrical box. Note: You can adjust your mounting screw lengths later if necessary. Place the mounting strip onto your electrical box screws so that the mounting screws face outward. Attach and tighten the mounting strip onto the electrical box with a screwdriver.

Hold up your light fixture with the flange next to one of your now-positioned mounting screws. Verify the spacing of your screw depth, keeping in mind the depth of your light nut holes for screwing on later.

Make any adjustments to your mounting screws that are necessary. Twist the black-cased wire ends with the black- or dark- cased electrical wire end. Note: The number of black and white wires that your light fixture has depends largely on the number of light bulb positions it has; because electricity is required at two separate positions on this particular lighting fixture, two separate black wires and two separate white wires on the fixture itself are involved.

These exposed wires are called ground wires, and they are meant to attach to the earth so as to neutralize electric currents as needed.

At this point, you should have a secure, capped connection of all wires to their appropriate counterpoints. Your helper should be starting to moan about not being able to hold up the light any longer. The last thing you need to do with the electrical is to wrap the open ends of each wire nut and wire casing with electrical tape. This is to provide a layer of insulation and protection to any part of the wire that might, for whatever reason, be exposed outside the wire nut.

This is a critical step to do correctly. Set the flange gently onto the mirror surface with the mounting screws coming out the screw holes. The light nuts, which will go onto the ends of the mounting screws to hold the light in place, need to be screwed on. They need to be tight enough to hold the light fixture in place but not so tight that the fixture puts stress onto the mirror. Do NOT overtighten. A light nut that is too tight can fracture a mirror even a year later after installation.

Attach any lamp shades necessary, depending on the style of your lamp. Hope you love it! Talk about utilizing the reflective power of a mirror in a small space to amp up the light! This makes the small bathroom feel so much bigger and brighter. Remember how I mentioned a tradeoff when we had to use the mounting strip instead of the mounting circle?

The tradeoff was that the light nuts could not be aligned parallel with the light, because of how the screw holes fell in the mounting strip. They are tilted, as you can see here. Despite that small annoyance, however, the light fixture is a perfect addition to this bathroom makeover. And, with LED Edison bulbs , the fixture really combines old and new — the best of both worlds. Mounting a light fixture on top of a bathroom vanity mirror is a beautiful way to add light, height, and presence into your bathroom.

Note: The author is an experienced, although not professional, DIYer. Neither the author nor Homedit is responsible for any injury or damage that may be a result of following this tutorial. Home Decorating Trends — Homedit.

Installation of a vanity light

Installation of a vanity light

Installation of a vanity light